SweetSpot Strips Micro | Pre-Cut 1G Strips

Precision weighting. Zero faff. Peel, press, play.
What SweetSpot Strips Micro Do
Pre-cut 1g strips for targeted paddle weighting.
No scissors, no measuring — just peel, place, and press.
Add one gram at a time to dial in exactly where you want more weight. Each strip helps:
✅ Expand your sweet spot in a specific zone ✅ Reduce twisting on off-centre hits ✅ Increase stability without added swing weight ✅ Add dwell time for better control and resets ✅ Improve forgiveness on miss-hits

Weighting Position Guide
Top — Power & head weight Raises the balance point. More punch on drives and overheads, but slightly slower to manoeuvre.
Top Corner (10 & 2) — Power & sweet spot The most popular zone. Expands the sweet spot outward without making the paddle feel head-heavy. Start here.
Side Edge (3 & 9) — Stability & sweet spot Resists twisting on wide or off-centre hits. Minimal effect on swing weight — the paddle just feels more stable.
Bottom Corner — Power & lowers sweet spot Less common. Shifts balance toward the throat and lowers the sweet spot. Rarely recommended as a starting point.
Handle Edge — Stability & handle weight Keeps balance neutral or slightly handle-heavy. Makes the paddle feel quicker and easier to reset.

Installation
    1    Decide your zone — top, top corner, side or throat
    2    Hold strip against paddle (backing on) to confirm placement
    3    Peel backing, press firmly onto paddle edge
    4    Hold 10–15 seconds
Leave 12 hours before playing for best adhesion.
Stack strips in the same zone to gradually increase weight.

Removal & Re-Use
Peel upward slowly — no residue, no marks.
Can be reused if reapplied quickly before the adhesive dries out.
Each strip is pre-cut to 1g. May vary by ±0.03–0.05g due to manufacturing tolerances.